Please sign in so that we can notify you about a reply
Scope Digital Multimeter UNI-T UT81C
Compliances : IEC 61010 CAT. II 1000V, CAT.III 600V overvoltage and double insulation standard
UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance.
| Specifications | Range | UT81C |
| DMM Specifications | ||
| DC voltage (V) | 1000V | ±(0.8%+8) |
| AC voltage (V) | 750V | ±(1%+15) |
| DC current (A) | 10A | ±(1%+8) |
| AC current (A) | 10A | ±(1.5%+8) |
| Resistance (Ω) | 40MΩ | ±(1%+5) |
| Capacitance (F) | 100μF | ±(3%+8) |
| Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) |
| Scope Specifications | ||
| Bandwidth | 16MHz | |
| Sampling rate | 80MS/s | |
| Vertical accuracy | ±(5%+1) | |
| Vertical sensitivity | 20mV/div~500V/div (1-2-5) | √ |
| Time-base accuracy | ±(0.01%+1) | |
| Time-base range | 50ns/div - 5s/div(1-2-5) | |
| Features | ||
| Display count | 4000 | |
| Auto range | √ | |
| Duty cycle | 0.1~99.9% | √ |
| Diode | √ | |
| Auto power off | √ | |
| Continuity buzzer | √ | |
| Display | 160 x 160 monochrome | √ |
| Trigger types | Auto run/Normal/Single shot | √ |
| Memory | 10 screens and setups | √ |
| Contrast and brightness setup | √ | |
| Low battery indication | √ | |
| USB interface | √ | |
| LCD backlight | √ | |
| Input impedance for DCV | Around 10MΩ | √ |
| General Characteristics | ||
| Power | 1.5V battery (R6) x 4 | |
| Display | 60mm x 60mm | |
| Product color | Red and grey | |
| Product net weight | 498g | |
| Product size | 200mm x 100mm x 48mm | |
| Standard accessories | Batteries, test lead, alligator clip, USB interface cable, PC software CD | |
No posts found