Solar Charge Controller 12V/24V with LCD Display 30A MPPT

Solar Charge Controller 12V/24V with LCD Display 30A MPPT

Characteristic

• Maximum work point tracking (MPPT)
• Automatic 12 / 24V voltage detection
• Voltage and current regulation
• PWM charging
• Multistage charging technology
• Disconnecting receivers
• Automatic switch-on after disconnection
• LCD display of operating parameters

Security system

• Overcharging the battery
• Battery deep discharge
• Reverse polarity on each of the inputs / outputs
• Automatic electronic fuse
• Short circuit protection
• Surge protectors at the panel input
• Over-voltage protection Uoc when battery is not connected
• Before reverse current to the panel at night
• Against overheating and overloading
• Battery disconnection with too high voltage

• Output - input voltage:12V @ 20V-60V / 24V @ 30V-90V(autodetection)
• Supported battery type:AGM / Gel
• Charging voltage (adjustable):14.0V ÷ 15.0V / 28.0V ÷ 30.0V
• Backup voltage:13.8V / 27.6V
• Break voltage (LVD):10.4V ÷ 11.4V / 20.8V ÷ 22.8V
• Reconnection voltage:12.2V ÷ 13.2V / 24.4V ÷ 26.4V
• Battery overvoltage protection:12V @ 17V / 24V @ 34V
• PV overvoltage protection:12V @ 60V / 24V @ 90V
• Maximum charging current:30A
• Maximum load current:30A
• Own electricity consumption:<1mA (standby) / 15mA (work) / 130mA (work with connected load)
• Working temperature:-25 ° C ~ + 55 ° C
• Temperature compensation:12V @ 18mV / ° C / 24V @ 36mV / ° C
• Maximum cross-section of conductors:16mm / 6AWG
• Degree of protection (IP):IP21
• Dimensions LxWxH [mm]:175x175x95
• Weight [kg]:1.54